M1504 MATERIAL LIFT
The M1504 material lift is a commercial freight lift designed to transport material between levels of commercial buildings or homes. Ideal for industrial spaces, retail stores, restaurants, veterinary clinics, etc, this lift transports freight up to 1000 lbs. Available in models capable of up 4 stops and up to to 23′ or vertical rise. With 60″ tall stainless steel side walls (80″ optional) and diamond plate stainless steel flooring, the M1504 is built for durability as rigorous use.
Intended for use inside a shaftway, the unit can be ordered in a choice of standard sized platforms or custom sized.
A call station at each landing controls this freight-only hydraulic lift. The simplicity of installation over a typical dumbwaiter means the M1504 lift might be the simplest way to keep your material moving. The M1504 is backed by a three-year warranty.
Car Sizes
- 36” wide x 54” long
- 42” wide x 60” long
- 48” wide x 60” long
Standard Features
- Commercial and residential applications
- 120VAC 30A electrical service requirement
- 60″ tall stainless steel walls
- Stainless steel diamond plate floor
- Continuous-pressure operation
- Call/send station at each landing
- 1000 lbs capacity
- Up to 23′ vertical rise
- 20 ft/min nominal speed
- Up to 4 stops
- Manual lowering device
- 3″ minimum pit
Optional Features
- 80″ wall height
- Fire-rated landing entrances
- Custom colors
- Fixed access ramp (for pitless applications)
PACKAGE HANDLING MATERIAL LIFTS
- Conforms to ASME B20.1 Safety Standards
- Up to 500 lbs Capacity
- 3′ x 3′ carriage
- Up to 17′ vertical rise
- Up to 60 ft/min nominal speed
- Indoor use only
- Load/unload from one of three sides at each level
- Integral interlocked access gate provided at each level
- Safety systems included to prevent worker injury
- Pressure switch to prevents the carriage from drifting or sinking
- Velocity fuses prevents uncontrolled descent in unlikely event of hose failure
- Safety valves holds carriage in place in the event of power loss
- Safety cams prevents carriage decent in unlikely event of chain failure
HYDRAULIC VERTICAL FREIGHT LIFTS
Standard Features:
- Conforms to ASME B20.1 Safety Standards
- Up to 8,000 lbs Capacity
- Carriage sizes up to 12’ x 10’
- Up to 22′ vertical rise
- Up to 24 ft/min nominal speed
- Indoor or outdoor models
- Lifetime structural warranty
- Control panel remotely mounted
- Pressure switch to prevents the carriage from drifting or sinking
- Velocity fuses prevents uncontrolled descent in unlikely event of hose failure
- Safety valves holds carriage in place in the event of power loss
- Safety cams prevents carriage decent in unlikely event of chain failure
Optional Features:
- DeckLock Safety System locks carriage in place at upper levels preventing movement during loading/unloading
- Epoxy or hot-dipped galvanized finish for chemical or outdoor applications
- Explosion proof components for classified environments
MECHANICAL VERTICAL FREIGHT LIFTS
Standard Features:
- Conforms to ASME B20.1 Safety Standards
- Up to 50,000 lbs Capacity
- Customized carriage sizes
- Customized vertical rise
- Up to 20 ft/min nominal speed
- Indoor or outdoor models
- Lifetime structural warranty
- Four-post design accommodates loading/unloading with flexible traffic patterns from all four sides
- Carriage is lifted and lowered by heavy-duty roller chain attached to mechanical lifting mechanism on top of 6″ guide columns.
- Control panel remotely mounted
- Safety cams prevents carriage decent in unlikely event of chain failure
Optional Features:
- DeckLock Safety System locks carriage in place at upper levels preventing movement during loading/unloading
- Epoxy or hot-dipped galvanized finish for chemical or outdoor applications
- Explosion proof components for classified environments